News / Company News

Things you must know about the hydraulic station

Things you must know about the hydraulic station:
1. The first is the working temperature problem. The working temperature is generally between 30 °C and 60 °C for a hydraulic station of brick making machine, and the maximum temperature cannot exceed 85 °C. The hydraulic station will automatically stop working above 85 °C. And long-term work above 70 °C will reduce its service life.
 2. The fuel tank should be kept clean and carefully check for any debris inside the tank before each use. If there are any sundries, they should be cleaned up in time.
 3. The oil level in the fuel tank should be filled as required. Make sure that the amount of oil in the tank is appropriate and that it cannot be added too much. Do not work under too low or too high a quantity of oil.
 4. The hydraulic oil should be completely drained once every six months to prevent the accumulation of pollutants in the oil at the bottom of the tank.
 5. There must be no dust or debris in the work environment. Filter once every 24 hours with a 15um filter.
 6. Turn on the circulating condensate in the cooler before working, and keep it in the working condition, so that the hydraulic station is always at the proper working temperature. In addition, it is very important that the water must be released after using the cooling water in winter to prevent the condensation pipeline from rupturing after the water freezes.
 7. Pay attention to the working condition of pressure gauge, directional valve and solenoid valve at any time during the work. If an abnormality is found, it should be solved promptly and promptly. Prevent further damage.
hydraulic station of brick making machine